"The Cycloid-Space-Curve-Motion Cycle of Atomic Transitions"
as discovered by the Austrian Physicist,
Viktor Schauberger
Very briefly, Viktor Schauberger engineered several types of machines that would create an up-current of axially-spinning air so powerful that the up-current's drag force would speed the whole machine higher and higher into the air. Of the many different types of air turbines he made several of them boasted a thrust force of nearly 10,000 bhp - simply by moving air. Some designers have utilized Schauberger's special turbines for flight (see fig. 1) and new research (see below) suggests that there indeed is a strong case for the continuation and re-establishment of Schauberger's research into these hugely beneficial technologies. 
Unfortunately Schauberger was an Austrian caught up in the inhumanities of war-stricken Europe, and at the peak of his creativity was forced to work for the German war effort until the end of WW II. Under orders from Himmler he was to carry out research-and-development for the Germans at Mauthausen concentration camp where he worked with twenty to thirty prisoner engineers on secret projects centered around 'higher atomic' energies. He received special dispensations from the German SS, for both himself and his prisoner engineers, to carry out this research work. In 1944 he and his engineers were moved, again under the direct orders of the SS, to Leonstein in Austria. At that war's end most of his machines at Leonstein were sequestered by American and Russian 'engineers' and cul-de-sac'd. After the war he moved to Salzburg, but found no-one willing to help him further his researches. Schauberger wanted purely to help humankind make a better world for itself. In return his life's work was taken from him by the arts of businessmen, and he died a broken man in 1958.
Perhaps as a gesture of good-will, both the Russian and American 'engineers' should return these research documents and prototypes to the Schauberger family at PKS Austria, or at least publish the voluminous research works that are, after all, the legacy of one of the greatest engineers of all time.! But for a collection of notebooks, design-board sketches, and articles published in German periodicals (see note 1), and a smattering of published patents all of this great man's contribution to New Physics would have been lost to the world. The subject of Viktor Schauberger's discoveries has no handy starting point, so I'm going to jump straight in where it suits best the overall subject of flying aircraft.
The Pipe - Stage One
Central to any understanding of Schauberger's levitating force is his use of the cycloid-space-curve. This he used to generate a dual flow of fluid through a pipe - of an inner axial flow which moved faster through the pipe than did its peripheral flow which was especially directed into a cycloid path (see fig. 2).
In this flow-separation lay the secret of the inducement of what Schauberger referred to as implosion - a force opposite to but many more times more powerful than ex-plosion. This unique force though was merely one stage in a whole cycle of transitions resulting in a thermo-electric process that transformed ordinary air, water, or sea-water into a super-biomagneto-kinetic force.
The pipe gives one example of how Schauberger brought about what he referred to as a "fermentation" and a "cold-oxidizing" of, as in this case, natural water. The same principle, as will be seen further below, could be applied to atmospheric air. Using Schauberger's terminology, his task was to segregate the carbone and the oxygene particles of water or fluid, process them, and then reconstitute them with a different energy configuration - with a much higher energy quota than was normal. Then, by using certain characteristics of a vortex, in conjunction with the implosion effect, it would channel the resulting release of repulsion energy and use the energy for kietic propulsion of the generating device.
This is how he did it: If you look at the flow patterns drawn into fig. 3, it can be seen that what this pipe created was a peripheral cycloid flow which acted centrifugally, close to the pipe wall. This motion would begin to draw out and harness the organic carbones of the through-flowing water. Correspondingly, tight to the centre of the pipe was drawn the inorganic oxygenes rotating under a centripetal reactive force. His discovery that water's (and air's) carbones react to a centrifugal influence, while oxygenes to a centripetal one having come from many years of previous experimentation and observation (see note 2).
The special guide vanes secured into the pipe to rotate the peripheral fluid flow were also specifically placed lengthwise at specific intervals, over the whole length of the pipe, to instill an alternating increase and decrease in the flow-pressure along the pipe, which resulted in a general cooling in temperature of the whole water-mass (another one of Schauberger's discoveries - Viktor Schauberger British Patent: Water conduit, #415280, of 1934 ).
What occurred under the influence of these opposite motive forces, within the water, was a metabolic process of transformation (see note 3), or as Schauberger explains, "It is also known that dissociation and re-combination, therefore the rearrangement of the atoms, can be effected in the substrate with the aid of catalytic processes. In this regard it has been observed that these processes take place in a characteristic cycle or oscillating rhythm until a new state of equilibrium is established " (see note 4). The processes that he could generate by using the cycloid-space-curve-motion within an enclosed space would lead to the almost instantaneous production of a lower and a higher product of synthesis (see note 5), which constituted the dissociation part of the process.
Fission and Fusion
Through the cooling of the water the density increases, and as the differentially rotating central core (of oxygenes) and peripheral spiraling carbones rotate about each other their bipolar ingredients constantly abrade at the intervening slip plane and against the outer-wall guide vanes. This breaking down or refining process further induces a dissociation of the micro-particles of the two separated fluid flows, firstly by a process Schauberger named the oligo-dynamic effect (see note 6) of decomposition and hence a liberation of supplementary influences, and secondly, by a shriveling up and densifying of both the oxygene and the carbone elements, thereby creating a reduction in volume. Thirdly the carbones, or rather the residues of the carbones, are rendered unipolar (and potentially different from the oxygenes).
As a result, the axial core of the fluid accelerates ahead of the peripheral (spiraling) flow thereby increasing the potential-difference between the two flows. Then, in what can only be described as a highly complicated triggering of bio-electric chain-reactions, there occurs an energetic interchange between the residues of the abraded carbones and the axially-flowing oxygenes. Whereby, as Schauberger stated, "If this state [of interchange] is reached at the anomaly point [of 3.98ºC or 39.164ºF], then the highly energized organic residues (the former particles of the carbones) bind their fertilizing counterparts (the oxygenes), and the naturalesque product of synthesis is complete" (see note 7).
One would suppose that this 'charged water' would be likened to a fluid in colloidal form, whereby its molecules would have instilled into them a strong, negative electrical charge, but, according to Schauberger, this was not the case. He proved that the product of this process was a much higher form of energy.
"If on the other hand a tri-polar mass is split up by suction-intensifying and temperature-reducing dynamic influences, then the true creative substance (residues of carbone) will be exposed to revitalizing (cooling) temperatures. In this case the formative pulp-matter becomes free, unipolar and so highly active that it binds, consumes and digests the oxygen, which has become passive under this other dynamic influence. The end product of this magnetolytic dissociation is the predominantly magnetically charged ion, whose original formative and levitative force, which as everything else in Nature is to be understood as an indirect effect, can be intensified by up to 96%. Imbued with levitative force, these ions suck up the inferior matter and the generating device in their wake..." (see note 8).This was a discovery previously unknown to science at the time.
In conclusion then, from the above delineation of what happens inside this special pipe, at this stage in the transition-process there is a RADIAL-TO-AXIAL (centripetal) force, and chain-reaction, which performs a highly dynamic transformation upon the pipe's through-flowing fluid, whose reaction is to accelerate in a perpendicular motion along the longitudinal axis: By way of an electronic analogy, it is somewhat similar to an outer ring-electrode and a central axial electrode, whereupon a non-uniform electric field exists to create an oscillating combination of electrophoretic and streaming potential reactions. the reactions of which upon the fluid would be to alternately generate electro kinetic energy and be accelerated by electro kinetic energy.
One More Step For Mankind -
Stage Two
But the Pipe discovery was only the first step toward a Schauberger-type flying aircraft. The next step can be found in Schauberger's centripulser Repulsine machine. When I first saw the drawings of a Repulsine prototype made by Schauberger in the 1940's, I thought there must be a turbine inside that rotated to create the centrifugal force it required to process it's fluid - but - it seems this prototype didn't work like that. In fact, the whole machine rotated as one unit to create it's centrifugal effect. This rather bulky and cumbersome machine has been thought, by some researchers, to hold the secrets of gravity-manipulation. This machine was however, more likely to have been built merely as a demonstration model to show others some of the principles of his (Schauberger's) discoveries.
From the sketches for his other centripulser turbines such as the Klimator turbine and his Repulsator turbine, there can be seen the next ‘basis’, which Schauberger designed into his atom-transforming and levitating machines. For in these machines, the above Pipe processes were transferred to, and configured as, a centrifuging air chamber that alternately braked and pulled upon the air-fluid moving through it.
Inside this Repulsine, the discoveries Schauberger made in the PIPE process, above, were transferred to, and configured as a multi-plated, rotating turbine, with an amazing amount of skill and brilliance. It has to be said, Schauberger and his team of engineers did this task with a creativity and engineering prowess that the old Newtonian physicists of today can only dream of. On close inspection of this machine (in the figures shown here and shown in Schauberger's other patent applications and sketches for his 'centripulser' turbines) can be seen the next 'basis' upon which he designed his atom-transforming and levitating machines.
In these centripulser machines, close regard was paid to the principles of the Pipe processes, in that, when the chamber was rotated at above 10,000 rpm a considerable suction was created at the chamber's central inlet ducts as a result of the centrifugal forces dragging the fluid radially outwards (see note 9). The water, or fluid drawn in, is accordingly, "sucked" through the machine's low-pressure chamber, wherein this flow is 'pummeled' by it's traverse around flow-restrictors (which, for instance, could comprise concentric rings) located inside the chamber in such a way as to shape and to momentarily exert pressure on the fluid flow.
Additional to these centrifugal (axial to radial) forces are the rotational forces, operating perpendicular to the centrifugal forces, dragging upon the air-fluid inside the low-pressure chamber. Rotating anti-clockwise, the Repulsine's tapering pressure chambers (where the cover plates taper down from the crests into the troughs) acted as a 'multi-stage centrifuge' to create a considerable suction at these 'ducts' (the Repulsine was rotated at around 10,000 rpm) (see note 9again), the air drawn in was then sucked centrifugally through the two (interconnected) waveform plates, made of inorganic silver-plated copper (see the removed cover plate in fig. 5).
Here then is what Schauberger called the transition-promoting planetary motion together with a rhythmical alternation of suction and braking-pressures. This alternating motion causes the dissociation process of the oxygenes and carbones of the through-flowing air into two separate components.
For, essentially, there are two forces involved here; the centrifugal suction-pressure-suction (which can be made into a rhythmical force), and the rotating frictional force of the turbine's low-pressure chamber (spinning at around 10,000 rpm). With these forces, Schauberger used to great advantage the fact that the carbones react more readily to a centrifugal force than do the oxygenes.
When the normal (atmospheric) air has entered into the mechanism at the air intakes around the centre and has begun the dissociation process, the oxygenes in the air flowing through will react less to the centrifugal forces than will the carbones (as in the Pipe explanation above) and so the oxygenes will get dragged more by the rotating frictional force inside the low-pressure chamber than will the carbones... meaning that the oxygenes will follow a longer radial curve than will the carbones on their radial flow outwards. There will be a dual flow, just as in the example of the Pipe above, where there will exist an expulsion of a higher and a lower form of this synthesis, which is now ready for the next stage of the process; the process of reconstitution (see note 10). What exits from the turbine at this stage is the 4% carbone + 96% oxygene i.e., the predominantly negatively potentiated energy.
The Work of a True Genius
In order to backtrack a little and show more clearly the process that occurs through the waveform plates, I have drawn in (fig. 7) an exaggeration of the separation effect which takes place (note that on some of Schauberger's prototypes, all five of the concentric waveforms had air intake ducts, while others utilized only two. For the sake of clarity, I have diagrammed here only two such rings of air intakes). Essentially there are two forces involved here; one - the centrifugal suction (which, as we have just seen, is a rhythmical force), and two - the rotating frictional force of the turbine's waveforms (spinning at around 10,000 rpm) in an anti-clockwise direction. With these forces Schauberger has used to great advantage the fact that the carbones react more readily to a centrifugal force than do the oxygenes.
In (fig. 7) it can be seen that the normal (atmospheric) air enters into the mechanism at the air inlet slits around the center. The oxygenes in the air, which react less than the carbones to centrifugal forces (as in the Pipe explanation above) get pulled, or rather dragged, more by the rotating frictional force inside the waveforms, than do the carbones, and so the oxygenes follow a longer radial curve than do the carbones on their flow outwards. The carbones (represented in fig. 7 as the wider band on the right) exit through the gaps between the blades on their inside curve, which if you look closely are of a larger radius of curvature than those on the outside, meaning that the air-flow speed will be greater for the oxygenes than for the carbones - this provides the slip separation and a slip pressure - just as in the example of the Pipe so as to force the same sort of transformation process...
When you then take into consideration what happens at the Repulsine's circumference, where the super-charged air exits, you can see that each pair of higher and lower forms of this synthesis will be squeezed together into a very tightly condensed 'skirt' of energy - ready for the next stage of the process. With such ingenuity this man Schauberger should have won the Nobel prize in physics for the Repulsine alone ! But then, seeing as Nobel was the inventor of high explosives, perhaps not...
This is why, when this machine was spun-up a blue-white luminescence could be observed glowing around the outer cowling. But this stage, as mentioned above, is still only one of potential energy, a potential energy that can be intensified at a ratio of 4 : 96, according to the great man himself.
Stage Three - To Infinity and Beyond...
Now, following on from the above two stages, we have a highly energetic force at the periphery of the machine, which is absolutely crackling with energy. If a suitably curved vessel is located below this rotating peripheral force, and which can turn and guide this force back towards the machine's axis - to transform this energy flow into a centripetal force - then, just as Schauberger describes its effect, it becomes an accelerated radically-to-axially in-winding rotational force.
And we are back at the same situation with what happened inside the Pipe in stage one, where it resulted in the axial fluid being accelerated at great speed through the pipe - well not quite. In this configuration, there is a lot more energy involved, and it has already gone through one stage of synthesis. Now it is being mechanically forced centripetally in towards the centre for its final transformation, the reaction to which is very forceful. This is IMPLOSION.
This is one of Viktor Schauberger's descriptions of what happens next to this energy; "As the end product of a natural or unnatural sequence of motion, it will be accelerated along either the longitudinal or the transverse axis. In the naturalesque - formative - direction of acceleration, which must take place along the longitudinal axis (centripetally), so-called electricism acts as the absolutely indispensable resistance for all motion. As the formative velocity rises, the resistance increases commensurately in order to provide the additional frictional (resisting) surfaces required by the accelerating matter. The actual loss of formative energy associated with this amounts to about 4%, i.e. in this case approximately 96% of the formative energy (= magnetism streaming upwards at enormous speed = levitism) is freed, which sucks up its generating device and a portion of its immediate environs in its wake" (see note 10). Indeed, in all of Schauberger's descriptions of this levitative force he nowhere describes it as either a propulsive effect i.e. created by a pressure-force, or as an electrical effect i.e. an electrokinetic force.
May the Force be Levitative
This force was one that streamed in spiral fashion upwards above the machine from the machine at high speed, and which drew the generating machine or craft up in its wake - an inverted vortex or black hole if you will. Schauberger variously referred to this projectile of force as a "magnetism", a "biomagnetism", an "organic vacuum", an "all-attracting force" or, as it was most often called, a "diamagnetismus" (see note 11).
Essentially it seems to have been the second stage of implosion. The first stage of implosion is the densifying effect (where the products implode under the centripetal cycloid motion and are squeezed into an ever-decreasing space where, as he says, they become increasingly densified) but there must follow on from this a repulsion force - as the next natural progression - which, just like in the Pipe process, shoots the product out of this densified core like a bullet high into the air (see note 12).
Stage Four - 
Flying Disc:
Archimedes displaced...
When Schauberger strove to explain his principles of levitating energy he drew upon the famous observation made by the Greek Archimedes and gave it a new twist, which I will try and duplicate here.
Here is what Archimedes would like to have said:
One - Since every body loses weight in proportion to the degree to which it is displaced by a specifically densifying medium (see note 13)... then,
Two - Sit in bath = loose weight (displacement of water).
Three - Sit on floor = loose no weight (no displacement of medium).
Four - If medium surrounding is more dense then it determines motion.
Five - Schauberger's trout (see note 14) expulses a densified fluid about its rear, as it expands it squeezes the trout forward.
Six - If you create a situation where normal air is more dense than the air directly above or ahead of the craft - the normal air will move the craft!
Seven - There are two sorts of 'levitational motive force' featured in the many machines of Viktor Schauberger...
Eight - One, a spinning upwards force would provide a NEGATIVE (vacuous) air density above the craft. Two, if the craft utilized only the centrifugal force, as in a Repulsine, it would propel a POSITIVE (increased) air density below the craft.
Both these motive forces will send the craft up into the air. May his work continue...
FDG
NOTES:
I must here say a special thanks to Callum Coats for his unstinting dedication toward his goal of getting out into the world an English translation of at least some of the writings of this great man Viktor Schauberger, certainly without Callum's books I would not have understood Viktor's valuable contribution to the re-alignment of scientific knowledge.