may 14 2009 7.31am
http://tech.groups.yahoo.com/group/mylow_magmo/message/1099
Hi Ben,
Glad to see you doing this project. It's been a long time hope things are going
well.
Yes Mylow's instruction video's are correct as it does work as he says.
I have seen so far what I thought, I have seen the switching of the stator
magnets with the indicator. I have only done this with 4 Oz magnets but it will
work with neo's. I have also found a bump in the magnetic field right in the
center of the track. I think most people will find this also, it's important as
it causes drag on the system.
Ben electronics always works big or small, magnet motors do the same. I'm going
to set up an indictor to measure the waves generated by this machine, I would
expect to see a triangle wave generated I will try to post the pictures of the
waves when I finish.
One important point is the stator magnets must be correct with the spacing for
the device your working on. I will say this, I do know how to make the fat lady
sing.
I have basically seen what I want to see. "Mylow has my vote".
I just can't wait for all those skeptics crawl under some big rock and pray for
the rock to fall on them.
Howard Johnson did some funny thing with magnets, like tipping the ends with
small neo's to change the shape of the fields I will measure that also and post
it. Mylow has not yet produced the rotary device as the patent calls for, it's
the rotary device that will change the world and it will work, 3600 Rpm's. I can
see it now and understand what went wrong with the thinking process on this
device.
Sometimes you must sleep on things to get the answer your looking for.
John B
may 14 2009 9:21pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1142
Ben,
I must agree with you also as I know your work Ben, My hat is off to Mylow
also. Everybody is going to find out that one important piece to the puzzle is
missing, I'm not going to say what it is at this time.
I'm not in any race with anybody on this machine, and yes I do more then just
batteries. Also it took many years to build that machine shop. I think what Rick
was trying to show was Mylow's instructions worked but did not give the answer
to making the machine run. First I do not care who makes it run first as they
will discover "something else".
People must ask what was he saying about the Smot, why bring it up if it did not
mean something, I can say this, HJ gates work completely different. Mylow's
drawings depict something very different...... You people must go to HJ's
patent to see what I saw. You all need to think outside the box on this one.
Anyway Ben great to here from you talk to you on the phone sometime about all
this. More to say later.
John
may 15 2009 8:10am
http://tech.groups.yahoo.com/group/mylow_magmo/message/1163
Queue,
I just have a few questions, did you get it to bounce between the stator
magnets?
The stator magnets, the spacing between is not really the gap between pole
magnets, I think the gap your looking for is the gap between the narrow point
where the stator magnet overlap. I know this sounds odd but it's easy for you to
give it a try.
This is not going to be easy to build for anybody as it is the magnetic fields
and what they are doing, I warned about this last night when I said what I
measured. When you push that first magnet in it should accelerate through the
gate and spin at least 3/4 around the disc after that the fly wheel carries it
through the gate again.
I also warned about a bump in the middle of the track, this bump slows down the
gate response. This machine look's very simple but" it is not". The machine runs
with differential vectors, meaning some add and some subtract, it's the
difference between two magnetic fields.
Sterling posted a chart showing the vector switch that is very close to what
must happen in the magnet, power spike of high potential forces the rotor magnet
out of the gate. Everybody must understand what Mylow is calling stator magnets
is a complex switch function with that spike. I have been sitting and watching
the switching with Rick. I have a good analogy of what must happen inside the
magnet at the correct time or that spike will not appear.
I faced all this with the Mono Pole Motor. The difference is, with an electrical
controlled coil you can very the switching causing the pole to flip both
directions.
A permanent magnet you must make non linear with the control of the Bloch wall,
by moving the direction of that Bloch Wall makes the magnet go off balance and
release energy in one direction, spike of energy, two in Mylow's.
This arrangement can be any size as it makes no difference. It's the imbalance
in the magnetic fields that make it rotate. everybody is building a mono pole
motor without the battery, the mono pole recovers the spike, in Mylow's case he
uses it for a motor force.
I did not want to get this technical about magnets but I guess it is time to
undo physics as you know it. So here it is, permanent magnets run one magnetic
stream agents the other you must imbalance one stream to form a non liner
magnetic structure this structure must perform a switching function or the
energy can not be released to push the rotor forward. Two ways to do this, add a
small tip of neo to one pole, imbalance the magnetizing machine by shorting part
of the field and causing the Bloch Wall to move off center.
This is the piece of the puzzle I'm working on, do the experiment take a big
magnet and approach a small magnet same polarity you will see the switch, first
it will repel and then it's attracted bang the switch happened. ( You can see
this with Mylow's machine)
The video Rick and I posted shows this switch, I did not have enough power in
the switch but I did show it so the motor stopped as the magnets I programmed
lost the switching function. No big deal I will do it better next time. Look's
simple to do but it is not.
John B
may 15 2009 8:33am
http://tech.groups.yahoo.com/group/mylow_magmo/message/1206
Sterling,
I will send it to you tonight, might make it longer with more detail.
John
may 15 2009 5:57pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1193
I must address the group about all this.
Sterling first, the George Green motor, is my motor it was taken from me and
never given back, I built this from the hammel device. go look it up on
Keelynet.
I only reason I'm here is not to take anything from Mylow, but to help with the
magnetic fields on his motor as I have built these devices from day one. I wish
you would have protected me in the SG group as you protect mylow now, thins
might have been different. You have the same disrupters now on this group. If
people find my information off the wall then so be it.
I'm going to say this again. Free energy is a gift you either give it away
freely or you take it to your grave with you. I find no profit in free energy,
Mylow has said many times in his video's I just want to open source it. It will
not work until the money changers are gone. Mylow's motor is a very complicated
switching system, you must understand that first.
I have explained that the switching is very important and you must understand
that first. I don't care how many magnets you glue on that disc it's not going
to work until you understand the switch and where the energy is coming from.
I can understand Mylow's frustration in his video's it's like a class room full
of kids not learning the math.
Most think they know what is going on but they don't, The disc is not the answer
and I don't care what size it is, it makes no difference if it was stone.
Again I'm going to say this, The stator magnets are a very complicated
switching mechanism. Mylow has a knack of feeling and faith. This device works
for Mylow but yours does not, why. The spacing of this switch is very important
as the magnetic fields are balanced on a needle point that causes this spike in
the gate. I will also say this again, The magnetic streams run on agents the
other, that means neutral condition.
You must cause an imbalance in the magnetic fields or you can not have a motor.
Do not just think you can glue down magnets and have it start running, because
it won't. Mankind has dreamed of this type of motor forever, it's just now we
understand what non liner fields do, you must understand the vectors and what
they do this math is not for the faint hearted as it requires differential
vector amylases.
The energy is sucked from the Bloch Wall like a vacuum pump, yes it is spacial
energy pushing that motor at the correct timing, you will never get this to work
unless you understand this. And yes I did know Howard Johnson very well,
Howard's Gates are all non liner magnets. I also told you how to change the
magnets two different ways.
John B
may 16 2009 2:50am
http://tech.groups.yahoo.com/group/mylow_magmo/message/1233
Ben,
Good that is correct, Ben Mylow really needs a magnetic indicator to do it
correct. I have noticed that also but said nothing. Correct the disc magnets are
repelled on the input of the disc where the two stator magnets are close
together is where the gate is, the switch. Put your thinking cap on Ben. What
did I show you about super poles......in the window motor group. Think, Think,
Think. I will draw it and post it to the files as soon as I can.
John
may 16 2009 8:34am
http://tech.groups.yahoo.com/group/mylow_magmo/message/1251
Ben,
Watch the group, look at what is going on. I'm not a writer so I'm going to try
to explain the best I can again. The device look easy to do but it is not. In
life you can not run before you walk, or maybe you can, Mylow .
This motor is a device that takes advantage of the magnets that are NON
LINER, I'm not yelling yet.
Forget everything you have ever learned about physics as it has not been revised
for over 100 years. I said in the beginning that you must know what magnetic
fields do and how a regular motor works, how does it work? It rotates because of
an imbalance between the electromagnetic coil and the difference in the magnet.
A clever person one day discovers how to catch the wasted energy in the system.
The person says I think I will send that to the second battery and steal the
mechanical, that was the Mono Pole, a clever system.
Now Mylow comes along who is also very clever, he has been thinking for thirty
years about something he has seen in high school, it just happens to be Howard
Johnson's self running motor but it does not work.Howard Johnson never told you
how he made the magnets, did he. He worked in the military under secret orders
his whole life so everything was a secrete till he died, nothing ever worked
except the train which I showed on a video, he took the secret to the grave
didn't he. One strange thing he got a patent on a rotating motor which he took
to the patent office, the picture show him holding the stator magnet by hand
which you can not do with a permeate magnet motor as your hand moves. The other
thing is that everything Howard built was take from him by some unknown money
men, Howard built things for money, when it was finished the people came and
took it.
What was left of Howard's work is on DVD today and in books. Howard made one
comment to me before he died, The secret is how the magnets switch inside, they
must be non liner pole pieces. This means the north pole could be stronger then
the south pole but this is in just one magnet and so on.( This means real non
liner magnets, not off the shelf magnets)
What I'm screaming about,
I'm screaming because Mylow has figured out how to get the motor to perform on a
needle point, this very hard to do but he has done it by feel and faith, that is
not good enough for engineers or physics, is it.
However his motor runs in the video's and yours does not run.
If this is a hoax it is a very good one, but I have been involved in this type
motor before but it must use real non liner magnets, So my comments to the group
are with meaning on how it works as I do not goof around unless I know
something.
The magnets do not add up.
Do not think I have not been watching Mylow and what is going on, I also have
been watching what this group is doing as this is my field for a very long time.
I feel honored to help Sterling with this project but I'm not going run at it
head on without walking first. I want to know what make's it tick with all the
math and equations first. I also said I did my experiments to prove this out
Mylow's way to see if he was correct in the way he was explaining this to you in
the video's, he was to the best of his knowledge from what I could see.
So what makes it tick,
What make this machine run is when you get that imbalance in the magnetic fields
and only then. The stator magnet is arranged different from his first motor as
his first motor with one stator magnet is much different and I have some
questions about that considering that a stop scalar would form bringing the
motor to a halt with magnets arranged like that.
People who work on non liner machines,
Engineers know today non liner fields play tricks, so here is something to
investigate put an oscillator that is pulsed at low frequency (magnetic Pulse)
in the room set to a frequency and those magnet will spin at any speed. In fact
they sell such a device on the internet to fool people.
See Mylow's magnets do not look like Howard Johnson's magnets why is that?
I said I do not have any questions for Mylow as I have already figured it out in
my mind. I have seen real permeate magnet motors and they are non liner
machines, especially the magnetic structures. Mylow's magnets are way to simple.
Sterling just posted a Snake Bedini from you-tube showing that it is possible to
do this with my circuits. Why did this unit not work for the DHS when they took
it from the room, you know why and the vector math does not add up with these
magnets.
As I said I'm very quiet and will figure it out sooner or later as I work in
this field and I'm known for non liner machines. Don't let me discourage you
from continuing your motor. just do an experiment give the rotor plate to your
wife and have her glue the magnets on. see if it runs, switch the magnets anyway
you want. I'm real about what I work on and when I want to investigate something
I'm on it. I give evrybody a fair break and even go out of my way to help and I
will still help but the magnets do not add up for this device.
I want to see the machine moved somewhere else, Sterling has been through all
this before.
John B
sat may 16 2009 5:05pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1266
To All,
Look I have spent many years of my life working for the betterment of Mankind. I
said that when you have a machine that you allow everybody to replicate it with
out question, that means it's given freely and the inventor gives all the
knowledge to the group that he can, I have not seen that inventor here, Mylow.
I have not been here to destroy anything. You have not wasted your money in
vane, you have learned a lesson. I entered this group to teach what magnetic
fields can do if properly done with all the intentions of helping you.
After showing the Howard Johnson magnetic train I would have thought and from
what I was saying about motors people would ask questions about what non liner
magnets do. I'm an engineer I have been that my whole life I know how these
motors work it's very hard to show something that simple that would work
epically after doing the differential math and all the amylases.
I built an experimental device to see, you all said well it stopped rotating, no
it told me what I wanted to know, but Howard Johnson's train pick's up speed
real quick down the track. Look at Howard's Gates you will see the difference.
Those magnets are constructed with other magnets to shape the fields they form
non liner magnetic structures that do work. Yes I did know Howard Johnson and
yes he did have a motor, but it only contained one magnetic structure.
The machine was on a lazy susan. I will show some prints of his motors that he
worked on later in his life, The university screw Howard Johnson with false
data, the lab tec. His good friend died and Howard was left in the cold with
nothing I gave the money back that Howard had sent me when I had nothing, we
were there to help save the ramming stuff from his lab. The condition of Howard
Johnson was bad he was starving to death people The DVD and the books Tony
published for him gave Howard money but it was too late, to this day Tony sends
Howard's wife a check small because that is all the sales there are.
The same with me, Tony gets everything in the end unless my family wants it. The
inventors work always goes to the dump in the end as your wife or kid's have no
need for it.
Tom Bearden did see the only motor Howard ever built that worked. The foil on
the magnetic track does nothing as Howard covered everything up to hide it from
view. I have respect for Sterling and I want to know the truth, something that
is missing today.
Energy never goes away it just changes form and has a different pattern to it,
the Mono Pole is an example of that, but nobody understands how to use the
machine, but they will in the end.
A real magnetic motor has what would be termed as magnetic cams, Dixon, Flynn
and so on. Just because you put some energy in does not mean you can not change
the form to do something else and gain a benefit in the end. The magnetic motor
changes form to shaft power in the end, same a solar cells.
I have a open mind and I'm going to try everything I want to know what makes it
tick, then I'm going to say what is going on to the group.
Everybody just build it all at once let's see if they all work as the video
shows. I want to build the real deal and so do you.
Move that Mylow device to Sterlings place and let's see. take into the mountains
and let's see. in other words move it to where there is no power around for
miles, then you will know.
John B
sat may 16 2009 8:49pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1273
I have no problem answering questions from any of you.
When you look around my shop or in the lab everything you see I have built. All
the motors are my design, I take nothing from anybody, I have my own ideas, You
bet I'm aggravated about what I had to say and I mean it.
I do not goof around when I say I'm going to do something. Ask Sterling, I sat
right in front of Sterling and built a motor for his mother-law
and nothing was hidden from anybody, I have made 12 DVD's to show what I can do
with this technology and I'm not kidding around.
You want to learn non liner magnetic fields them I'm the guy as I have mapped
all kind of fields for 40 + years. I know where the energy is and I told you
what must happen to get it.
You just can not glue a bunch of magnets down and expect it to spin, Here, I
invite Mylow to come to my shop and make that motor run, the whole thing will be
filmed if it runs I will say it and eat my words in front of the whole group. if
the motor does not run who will pay me back for the time, how many takers do I
have now.
I said to everybody the gate must switch then the spike in the gate "adds the
free energy to push the motor forward" and that is the way it works, nothing
more nothing less. If you do not like what I have said then so be it. I tell the
truth about my work and what I have done in my life.
I'm not going to lie to Sterling about what I think about anything especially
when the Math does not add up and either does the magnetic fields. So what is
pushing that motor his mind. I've got to stop or I will get booted off.
John B
sat may 16 2009 10:35pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1285
Michael,
Look at it like a water fall, you would half to reverse the flow to a vacuum
to move forward. Watch fish in a stream they can stand still as the river is
flowing by. Vectors work the same way the magnet must be sucked in first with a
light magnetic field then the switch appears and the magnet is forced out.
Howard's gates work that way as you can see from the train, Rick is holding that
train but he can't get his hand off it fast enough. I'm going to release all
Howard's drawings so you can see what he did.
I will video the gate if you want to show how these fields change with a
magnetic indicator I will even measure the gauss if you want as I have all this
equipment to do so. But I'm not going to waste my time just glueing magnets down
that have no relationship to anything.
The videos that have been posted show there is no power from those gates to keep
the wheel turning. It is a funny thing Mylow glues five magnet down, you can
clearly see the force to push it into the gate, Bang he has a working Smot
machine, BS, you try that. You might get lucky and get it to go around two
times.
You are correct the placement of three magnets and the house of cards fall down,
know why?. Because a scalar appears in the magnetic field that causes a drag, I
tried to make it simple and called it a bump in the field for the group. It is
simple to make non liner fields, I told two ways to do it, change the way you
charge the magnets by shorting one side or add a small neo tip to one side. You
must move the Bloch Wall, since the Bloch wall is always at an angle you have an
advantage to change it.
If you move the Bloch Wall off center of the magnet one pole will be week and
one strong, that is what you want so the magnet can perform the switching
function. An example would be two positive voltages down the same wire as you
move down the wire the voltage keeps gaining. A voltage divider would be a
better example.
One thing to remember is that magnetic fields are streams of little magnets
spinning around out one pole and into the next. They run side by side forming
an neutral condition you must warp one to get a reaction.
The generator is a constant magnetic lock when you break the lock you get the
dipole or the electrical energy. The simple way to say this is you must charge
the iron first with that magnet then move the magnet out of the way, this breaks
the magnetic lock. hope this help you.
John
tried
sat may 16 2009 11:39pm
http://tech.groups.yahoo.com/group/mylow_magmo/message/1292
Andy,
You have a very nice setup, one thing I would try is to add a small south facing
magnet to the start magnet to cancel out that vector. you have nothing to
loose. you would place that on the side of the magnet your pushing in.
John
--- In mylow_magmo@yahoogroups.com, "Andy Graham" wrote:
> http://www.youtube.com/watch?v=mvx674bcHow
---