patent

Thomas Henry Moray: The Sea of Energy ~ Excerpts of technical factoids & illustrations of the Moray Radiant Energy Receiver

Submitted by admin on

rexresearch.com
http://www.rexresearch.com/moray2/morayrer.htm

Excerpts of technical factoids from:

The Sea of Energy

[ From the original The Sea of Energy in Which the Earth Floats ]

by

Thomas Henry Moray

1978 Edition: Cosray Research Institute, Salt Lake City, UT

Table of Contents

Introduction
Foreword
Chapter 1 ~ Early years
Chapter 2 ~ Radiant Energy in Earnest
Chapter 3 ~ Frienemies
Chapter 4 ~ Moray Products Company
Chapter 5 ~ Patents
Chapter 6 ~ Government Support
Chapter 7 ~ A New Era of Energy
Chapter 8 ~ Reactions by Means of Electron Excitation
Chapter 9 ~ Dissociation of Matter
Chapter 10 ~ Energy by Resonance
Chapter 11 ~ Conclusion
References
Appendix I
Appendix II
Appendix III
Appendix IV
Appendix V
Appendix VI
Figures


Introduction
[ 4th Edition ]

RADIANT ENERGY --- The term Moray has used to describe that source of energy coming from the cosmos to earth and radiating from the earth back from whence it came. This is the energy the Moray device captures and could be described as those particles of energy pervading all space. In the evolution of energy and the evolution of matter these particles of matter and energy (one and the same) manifest under certain conditions as pure energy and under others as pure matter. Radiant Energy from the cosmos, like radiant particles of matter, being composed of an infinitesimal quantity whose behaviors are described by mathematical equations similar to those used for describing electrical waves, keeping in mind to differentiate between wavelength and frequency. Radiant Energy is particles of energy, just as light is wavelengths and particles are comparable to the electron and magneton: a ring of negative electricity traveling in a vortex with the speed of light, streams of energy quanta, each quantum having energy and momentum where the electron revolves around the proton at a distance equal to the electron radius.

To summarize: Radiant Energy as herein used is that energy existing in the luminiferous medium of the universe, kinetic and exercised in wave transmission and rendered sensible by conversion of its energy into a detectable frequency. In the final analysis, Radiant Energy is a means of using the energy released by the fissionable reactions taking place in the stellar crucibles of the universe.

The Cycloid-Space-Curve-Motion Cycle of Atomic Transitions - as discovered by the Austrian Physicist Viktor Schauberger

Submitted by admin on

by Paul E Potter

Very briefly, Schauberger engineered several types of machines that would create an up-current of axially-spinning air so powerful that the up-current's drag force would speed the whole machine higher and higher into the air. Of the many different types of air turbines he made several of them boasted a thrust force of nearly 10,000 bhp - simply by moving air. Some designers have utilised Schauberger's special turbines for flight and new research suggests that there indeed is a strong case for the continuation and re-establishment of Schauberger's research into these hugely beneficial technologies.

Central to any understanding of Schauberger's levitating force is his use of the cycloid-space-curve, which initially he used to generate a dual flow of fluid through a pipe (see note 1) - of an inner axial flow which moved faster through the pipe than did its peripheral flow which was especially directed into a cycloid path next to the pipe wall (see Schauberger's patent 134543).

Stanley A. Meyer

Submitted by admin on
Stan Meyer's waterdriven car


Water fuel-cell designs http://www.keelynet.com/energy/meyerx.htm


From: http://www.free-energy.cc/electrolysis.html

"...Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.

Viktor Schauberger's Patents

Submitted by admin on

All patents are Austrian.

  • 066644 -- "Plow"
    • Plowing of the soil can be achieved with copper-covered plows instead of using plows made of iron or steel; reduce friction between the ground and the corresponding portion of the plow; and, slow disintegration.
  • 113487 -- "Construction for Creating Wild Brooks and Flow Regulation"
    • The construction for creating wild brooks and flow-regulation through the speed of water that is dammed; no destruction from course of the waterpath th

How to increase the electrical output of a nuclear generating plant by 20% --Louis Michaud's invention

Submitted by admin on
by David Delaney,  September 30, 2004

Nuclear generating plants operate at a thermal efficiency of about 33%.  A plant that generates one gigawatt of electrical power discards waste heat to the environment at a rate of two gigawatts.   If 10% of the waste heat could be turned into electric power,  yielding  0.2 gigawatt of additional electrical power, the total electrical power output of the plant would rise by 20%.

There has always been a very serious obstacle to converting any of  the waste heat into electrical power.  You need a heat engine to do it--an engine that allows a working fluid to expand and cool while doing work. The efficiency of a heat engine depends on the difference between the temperature of the working fluid at the input to the engine and at the output after it has been allowed to expand and work.   The greater this temperature difference, the more work energy you can get out a given input of heat energy into the engine. The problem with the waste heat from a nuclear plant is that, although it's pretty warm in human terms, its about as cool as it can be and still be rejected efficiently to the local environment of the plant.  You cannot get any more work out of it without making it a lot cooler, and there's no efficient source of coolth near the plant to cool the output end of a heat engine enough to get more work (electricity) out of that waste heat.

Stanley Meyer

Submitted by admin on

Stan Meyer's waterdriven car
 
 

 

http://www.free-energy.cc/products.html
Water fuel-cell designs http://www.keelynet.com/energy/meyerx.htm


From: http://www.free-energy.cc/electrolysis.html

Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.

Strahlturbine

Submitted by admin on

1930 - Strahlturbine

Schauberger's patent number 117 749:

The subject of the invention is a hydropower machine, which utilizes the living energy of a jet of water for the purpose of power generation.

According to the invention, the turbine wheel is a cone with corkscrew-like blades. The cone is aligned with its axis in the direction of the axis of the jet. In this way the jet of water is split and diverted out of its course and thus gives its whole living energy to the spinning cone in a way that, providing the length of the cone and the width of its base are in a correct relation to each other and provided the blades are set at the correct angle, these parameters depending on the speed of the water jet, the water will flow out of the machine without agitation....

Subscribe to patent