from http://www-phys.llnl.gov/N_Div/sonolum/

Sonoluminescence: an Introduction

About the LLNL sonoluminescence experiment

What is sonoluminescence?

Sonoluminescence is the emission of light by bubbles in a liquid excited by sound. It was first discovered by scientists at the University of Cologne in 1934, but was not considered very interesting at the time.^[1]

In recent years, a number of researchers have sought to understand this phenomenon in more detail. A major breakthrough occurred when Gaitan et al. were able to produce single-bubble sonoluminescence, in which a single bubble, trapped in a standing acoustic wave, emits light with each pulsation.^[2] Before this development, research was hampered by the instability and short lifetime of the phenomenon.

SEG - Searl's Electromagnetic Generator

from: http://pesn.com/2005/05/22/6900100_Searl_Effect/

"...Even more dramatic effects including concentric thermal “walls” were reported. These rings of magnetic fields around the device felt discernibly colder to the physical senses in addition to registering 6-8 degrees Celsius below the ambient temperature. And when the laboratory was darkened, the Russian scientists observed an unusual toroidal field of blue-pink glowing luminescence around the converter when it was in operation. Godin and Roschin admit they cannot explain these phenomena using the conventional models of physics. Please see: http://www.searleffect.com/free/russianseg/russianseg.htm..." ' "...And orgone energy is said to manifest as a blue glow. Could this be part of what the Russians observed in their glowing blue-pink coronal discharge? And what is the pink part? So far nobody has even offered a theory including the Russian scientists who could not make a guess themselves! ..."

 

http://www.free-energy.cc/products.html
Water fuel-cell designs http://www.keelynet.com/energy/meyerx.htm

From: http://www.free-energy.cc/electrolysis.html

Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.

23 august 2005

Ruud Rouleaux wrote:

Best way is to travel a littebit further to Austria and visit the PKS, in Bad Ischl. They have "open door" days every Wednesday. All the repulsine models were shipped into the US, during the trip of Walter and Viktor Schauberger into the USA.

esaruoho wrote:

erm.. what of this, then?

PKS seminars summary. doc (08-09 june2002) claimed this:

"...Richard Feierabend (RF) Investigation of German UFO project and discovery of VS material in USA RF investigated the WW2 German ”Flying Saucer Project”. One name that cropped up frequently was Viktor Schauberger. Discovered that Karl Gerchsheimer. Robert Donner and Norman Dodd had brought VS & WS (Walter Schauberger – son) to USA in 1958, with several crates of papers and prototype models, to develop practical applications of implosion technology. VS & WS returned home empty handed and had to leave all prototypes, drawings & papers behind after VS was pressured into signing a document which was not fully translated. RF made contact with Gerchsheimer, and shortly before Gerchsheimer’s death, visited him and, with KG’s permission, removed all the prototypes, models & papers he could find, including a repulsine. He still doesn’t know if he got all the stuff. RF contacted the Schauberger family to inform them that he had obtained most (if not all) of the material VS and WS were forced to leave behind in Texas in 1958. RF has been cataloging all the documents and prototypes and showed slides of much of the material he gathered and documented. RF is still slowly returning the materials to the Schauberger archives at PKS...".

http://groups.yahoo.com/group/viktorschaubergergroup/message/1142

From: "Curt Hallberg" <curt.hallberg@...>
Date: Tue Aug 23, 2005  12:35 pm
Subject: SV: [viktorschaubergergroup] Curt -> Klimator

Hi Stewart!

OK, I will TRY to answer your questions below! Now, I some cases we simply do not have the correct information. Then we must use our technical skill and imagination. An other thing we must do is to learn to think how Viktor Schauberger think. First read the litterature, doing this try to remember the most basic things about Implosion. Then maybe the most important: DO SOMETHING PRACTICAL!! Just start to play with water make spirals, or look into the nature in water falls etc. But DO something practical!!!

based on http://www.schauberger-books.org.uk/mainframe.shtml

1885 Viktor Schauberger born in Holzschlag, Upper Austria, into a family with a long tradition of caring for the unspoilt Alpine forests.

1914-18 Soon after the birth of his son Walter, Viktor was enlisted in the Kaiser's army.

1919 Appointed forest warden and gamekeeper.

1920 Became head warden ('forst meister') in Brunnenthall-Steyerling, the property of Prince Adolph van Schaumburg-Lippe.

Prof. A.H. Techet
Department of Ocean Engineering
Massachusetts Institute of Technology
Cambridge, MA 02139

To better understand the fluid forcing produced by fish when they are swimming it is necessary to first discuss the basic concept of a vortex and vorticity. A vortex arises when flow encircles a central point. Examples of where vortices occur in nature include: whirlpools, tornados, ocean eddies, blood flow through heart valves, and flow swirling behind rocks in a river current. Vortices appear in engineering fluid applications as well: flow around offshore platforms, tip-vortices from aircraft wings, helical vortices in propeller wakes and helicopter rotors. In general, vortices can form when flow passes any object with a non-streamlined shape or a sharp corner, and separates from the body.

...https://web.archive.org/web/20120314041605/https://www.pureenergysystems.com/academy/papers/Evolution_E.V.Gray_Circuit_Topology/index.html 

http://www.free-energy.cc/gray.html

In 1958, Edwin V. Gray, Sr. discovered that the discharge of a high voltage capacitor could be shocked into releasing a huge, radiant, electrostatic burst. This energy spike was produced by his circuitry and captured in a special device Mr. Gray called his "conversion element switching tube." The non-shocking, cold form of energy that came out of this "conversion tube" powered all of his demonstrations, appliances, and motors, as well as recharged his batteries. Mr. Gray referred to this process as "splitting the positive." During the 1970's, based on this discovery, Mr.