generator

Thomas Henry Moray Radiant Energy Pump/Electricity Generator

Submitted by esaruoho on

Thomas Henry Moray: Radiant Energy Pump/Electricity Generator

Thomas Henry Moray, Ph.D., (August 28, 1892 - May, 1974) was an inventor from Salt Lake City, Utah. Moray graduated from The Latter Day Saint's Business College. Moray studied electrical engineering through an international correspondence school course. He received a Ph.D. in electrical engineering from the University of Uppsala.

KeelyNET: Dr. Andrija Puharich's Vibratory Method -- Vibrations that Split Molecules produce Energy

Submitted by esaruoho on
http://www.keelynet.com/keely/puha1.txt
May 6, 1990
Dr. Andrija Puharich's vibratory method of breakin
Taken from KeelyNet BBS (214) 324-3501 - Sponsored by Vangard Sciences - PO BOX 1031 - Mesquite, TX 75150
May 6, 1990
Vibrations that Split Molecules
Produce Energy


Seawater - or even dirty rainwater - could be transmuted into fuel through a new technique serendipitously discovered by a researcher in medical electronics.

Alternative Energy Institute: Hans Coler (missing page found on web.archive.org)

Submitted by esaruoho on

"There is one thing stronger than all the armies in the world, and that is an idea whose time has come." ? Victor Hugo. Unfortunately for German inventor Captain Hans Coler, popular aphorisms don't always ring true. His innovative research on an over-unity Gravitational Field Generator was interrupted by Allied bombings during World War II.

Simplification: Tom Bearden

Submitted by admin on

By Leslie R. Pastor

http://peswiki.com/index.php/Congress:Member:Leslie_R._Pastor

The crux of Tom Bearden's published work, ultimately, is to reveal that the current 'energy' system is and has been deliberately flawed and curtailed preventing the acquisition of using 'free and abundant' sources of energy freely from the 'vacuum of space-time.'  Most people presume that 'energy' is 'created' by the power companies and then transferred along a grid line directly into your homes and places of business.  Nothing could be further from the truth, and, because it is true, has been deliberately hidden from the general public, academia, and our current electrical engineering schools.

Nikola Tesla "Lost" Manuscript? Not Verified as being authentic or not. Read it for yourself..

Submitted by esaruoho on
Hi all,

The introduction below explains the rest of the article, and I have made some comments at the end of the post. Apologies, I know I mentioned this a few weeks ago and some people had expressed interest in reading it. The author's introduction and postscript are done in italics to differentiate from the manuscript. So here you are, without further ado:



------------------------------------------------------------------



Introduction
This manuscript has been loaned to me by my acquaintance. During his stay in the USA he bought an old fire-helmet, which was on sale in the streets of New York. There was an old writing book inside this helmet, apparently used as a lining. The writing book had thin and partially burned covers producing the smell of mould. All its yellowing sheets were full of notes written in ink faded under the influence of time. In parts the ink has lost its color to such a degree that some of the letters can only be guessed at on the yellowed paper. In other places, large parts of the text have been completely spoiled by water, having been transformed into white ink stains. In addition, all the sheets have been burned on the edges and as a result some words are irretrievably lost.

Chapin B. Bouffard - Plug into Water: Generating Electricity through Electrokinetics

Submitted by esaruoho on

CALIFORNIA STATE SCIENCE FAIR
2004 PROJECT SUMMARY
Ap2/04
Name(s) Project Number
Project Title
Abstract
Summary Statement
Help Received
Chapin B. Bouffard - Plug into Water: Generating Electricity through Electrokinetics
J0705


Objectives/Goals
The hypothesis of this project was if different types of salts were added to water, then there will be an
increase in the efficiency of generating electricity using the Kelvin Water Dropper.

Methods/Materials
500g of magnesium sulfate was added to 12.0L distilled water to make the magnesium solution. Also,
500g of sodium chloride was also added to 12.0L distilled water to make up the sodium solution. When
the tests were run, the water tank had to have the same amount of pressure for each trial in order to get
efficient results. Three trials were run for each solution with the following results:

The Kelvin Water Dropper - What You Will Need To Build Your Own - How To Build It - What You Will See - How It Works

Submitted by esaruoho on

http://physics.about.com/cs/experiments/a/260303_4.htm 

The Kelvin Water Dropper

What You Will Need To Build Your Own

Did you know that you can build a very simple high voltage generator which has no moving parts and is powered by the energy of falling water? By dribbling water through empty tin cans, thousands of volts can be “magically” generated.

The water dropper was named for its inventor, the Baron Kelvin (1824-1907). A professor at Glasgow University (from 1846), Baron Kelvin also made important contributions to experimental electromagnetism and theoretical thermodynamics. With James Joule, he discovered the Joule-Kelvin effect. His name is also given to the unit of the absolute temperature scale, the kelvin.

Lord Kelvin Water drop electrostatic generator

Submitted by esaruoho on

Water drop electrostatic generator

 lightening discharge
Please note:

Some people have reported to me difficulties in getting this device to work.
You need to have some good clean fresh water for this thing to work,
I tried normal rainwater stored in plastic tank here and it did not work either. I charged this water up using a vande graf generator and the dripper then worked as described although not well.
I think water from a reservour supply may not work as well as it sits in storage area and metal pipes and this subjected chlorine and flouride and with the ambient heat to keep it drinkable although nature lovers would consider this water dead.
I may be wrong but if you can get some pure clean mountain or running spring water you may be more successful.
if the water is chilled to 4 degree celsius this may also help as water seems to lose something when heated by the hot sun when out in the open
The best water it seem to be something stored in darkness and kept chilled if you are to believe followers of Viktor Schauberger
If you used poly pipe this stuff when it gets damp will conduct electricty away from the cans and I suggest you varnish all the plastic of it using a natural vanish not the petrol chemical version or use a better supporting material.
Wood restorers or hardware suppliers may be the source to try.
The water also has to drip and not be a continous stream but a drip by drip operation.
If the air is moist around the device such as high humidity or rain in the air ,it will not work also as the charge will not be allowed to build up due to the water conducting the charge into the surrounding enviroment.
It should however work great if you have a thunderstorm , A good dry environment is what you are seeking.
if others out there have suggestions that make this device work I would welcome your input here Geoff

Subscribe to generator