Konehead

This a simple step by step AC motor "rotovertor" conversion demonstration
IN NUTSHELL:
Hook 3ph AC motor up to its HV 460V circuit. this will be shown on its label.

Here is way to charge battery from a rotovertor AC motor, and the pulsing to the charge battery only occurs at the peaks of the sinewave feeding the AC motor, which makes the battery-charging "non-reflective" to the amperage draw of the motor while charging the charge battery. In other words, the amps draw to the AC motor stays the same if charging 2nd battery stack or not.

Here is the revised sinewave peak circuit where now the transformer is in series from Line 3 on RV motor instead of paralell across the run cap.
(previous description: "Here is way to charge a battery from a rotoverter AC motor, and the pulsing to the charge battery only occurs at the peaks of the sinewave feeding the AC motor, whihc makes it "non-reflective" to the amperage draw of the motor while charging the charge battery.")

Here is way to charge a battery from a rotoverter AC motor, the pulsing to the charge battery only occurs at the peaks of the sinewave feeding the AC motor, which makes it "non-reflective" to the amperage draw of the motor while charging the charge battery.

from http://www.geocities.com/koneheadx/circuitdiagrams.html

"Here is great circuit that will increase the power and speed in a pulse motor, while decreasing the current draw to it at same time while also chargeing a 2nd battery stack"

from: http://www.geocities.com/koneheadx/circuitdiagrams.html

Konehead makes a free energy pulse motor that can achieve overunity using a Bedini like design and gives a good explanation.